Dr. Paul Jukes
Ph.D., MBA, CEng, FIMarEST, FIMechE, FEI, FCMI

Publications


  1. Carlton, J., Jukes, P., and Sang Y., Encyclopedia of Maritime and Offshore Engineering, Wiley Books, March 2018.
  2. Singh, B., Bhattacharya, A., Jukes, P., Wittkower, B., ‘Advances in Offshore Corrosion and Integrity Management’, Corcon, Mumbai, India, Paper CP121, 17-20 September 2017.
  3. Jukes, P., ‘Fabrication Welding Processes’, EMOE148, Marine and Offshore Encyclopedia, Wiley, 2017.
  4. Jukes, P., ‘Offshore Pipeline Construction and Installation’, EMOE474, Marine and Offshore Encyclopedia, Wiley, 2017.
  5. Jukes, P., Singh, B., ‘Marine and Subsea External Sea Water Side Corrosion’, EMOE153, Marine and Offshore Encyclopedia, Wiley, 2017.
  6. Hassanin, A., Jukes, P., ‘Reserve Strength and Redundancy’, EMOE407, Marine and Offshore Encyclopedia, Wiley, 2017.
  7. Hassanin, A., Jukes, P., ‘Risk Analysis’, EMOE177, Marine and Offshore Encyclopedia, Wiley, 2017.
  8. Hassanin, A., Jukes, P., ‘Pipeline Mechanical Design’, EMOE557, Marine and Offshore Encyclopedia, Wiley, 2017.
  9. Hassanin, A., Jukes, P., ‘Inspection, Monitoring, Maintenance and Repair’, EMOE563, Marine and Offshore Encyclopedia, Wiley, 2017.
  10. Hassanin, A., Jukes, P., ‘Flood, Gauge & Test, Pre-commission, Commission & Decommission’, EMOE562, Marine and Offshore Encyclopedia, Wiley, 2017.
  11. Singh, B., Bhattacharya, A., Jukes, P. and Wittkower, B., ‘Advances in Offshore Corrosion and Integrity Management’, CORCON, Mubai, India, September 17-21, 2017.
  12. Han, Y., Clukey, E., Ravirala, N. and Jukes, P., “Investigation of Pipe-Soil Interaction on the Fatigue Life Extension of Subsea Pipeline Free Spans”, ISOPE, San Francisco, 2017.
  13. Ravirala, N. and Jukes, P., “Advanced Composite Structures for Subsea Pipeline Design Development, ISOPE, San Francisco, 2017.
  14. Shen, Y., and Jukes, P., “Technical Challenges of Unbonded Flexible Risers in HPHT and Deepwater Operations”, 2015-TPC-1072, ISOPE, Hawaii, 2015.
  15. Wittkower, B., Botto, A., Garcia, J. and Jukes, P., “Piper Alpha Incident – 25 years (quarter century) and Carrying the Message Forward – Providing Renewal of Lessons Learned as a Keystone of Prevention”, ISOPE, Busan, Korea, 2014.
  16. Kulkarni, S., Sawant, S., Ozturk, B., and Jukes, P., “Riser/Flowline Replacement Project – Riser Connector Strength Analysis,” 2013-TPC-633, ISOPE-2013 Anchorage Conference, The 23rd International Ocean and Polar Engineering Conference, Anchorage, Alaska, USA, June 30-July 5, 2013.
  17. Wittkower, Bob; Botto, Adriana; Garcia, Jose; Poblete, Ben; Jukes, Paul; “Brownfield HAZOP / PHA Application for Residual Risk Removal Creating a Safer Future From Current Studies”, Proceedings of the 2013 SOPE Conference, Anchorage AK, June 30-July 5, 2013.
  18. Zhu, H., Al-Showaiter, A., Eltaher, A., Whooley, A., Jukes, P., “Cross Flow VIV Analysis of a Subsea Pipeline and Jumper using FSI Method,” SPE 157720, Proceedings of the SPE Annual Technical Conference and Exhibition, San Antonio, Texas, October 2012.
  19. Chica, L., Pascali, R., Ozturk, B., Jukes, P., Gamino, M., Smith, K., “Detailed FSI Analysis Methodology for Subsea Piping Components,” OMAE, Rio de Janeiro, Paper #83710, 2012.
  20. Wittkower, Bob; Adriana Botto; Ben Poblete; Jose Garcia; Dr. Paul Jukes. “Residual Risk Removal by Brownfield HAZOP Application, Knowledge Management and Related Aspects”, Mary Kay O’Conner Process Safety Center International Symposium Presentation, Texas A&M University, Oct 23-25th 2012.
  21. Eltaher, A., Jafri, S., Panikkar, A., Jukes, P., and Heiberg, G., “Advanced Finite Element Analysis for Qualification of Spiral Welded Pipe for Offshore Application”, ISOPE, Rodes, Greece, June 17-22, 2012.
  22. Eltaher, A., Showaiter, A., Abdalla, B., and Jukes, P., “Effect of Modelling Concrete Weight Coating on Assessment of Strain Concentration in Pipeline Field Joints”, ISOPE, Rhodes, Greece, June 17-22, 2012.
  23. Sun, J., Shi, H., and Jukes, P., “Thermal Expansion and Global Buckling Mitigation of HPHT Deepwater Pipelines, Sleeper or Buoyancy”, ISOPE, Rhodes, Greece, June 17-22, 2012.
  24. Wittkower, B., and Jukes, P., “Examples of Disaster Prevention to Change Defective Safety Culture and Overcome Organizational Inertia”, ISOPE, Rhodes, Greece, June 17-22, 2012.
  25. Chica, L., Ozturk, B., Pascali, R., Jukes, P., Gamino, M., and Smith, K., “Jumper Analysis with Internal Interacting Two-Phase Flow”, ISOPE, Rhodes, Greece, June 17-22, 2012.
  26. Zhang, L., Eltaher, A., and Jukes, P., “Riser VIV Axial Fatigue Analysis and Mathieu Instability Mitigation”, OTC, Houston, April 30-May 3, 2012.
  27. Jafri, S., Eltaher, A., and Jukes, P., “Dynamic Stresses and Fatigue Evaluation of Wind Turbines”, OTC, Houston, April 30-May 3, 2012.
  28. Ozturk, B., Sharma, K., Eltaher, A., and Jukes, P., “Ocean Current Monitoring from 5000-1000 Metres”, OTC, Houston, April 30-May 3, 2012.
  29. Eltaher, A., Al-Showaiter, A., Hossain, K., and Jukes, P., “An Investigation into the Lateral Response of Heavy vs. Light Pipe”, Deep Offshore Technology (DOT 2011), New Orleans, USA.
  30. Sun, J., Wang, J., Shi, H., and Jukes, P., “Advanced FEA for Deepwater HPHT Pipelines”, OTC Brasil 2011, Rio de Janeiro, Brazil.
  31. Hossain, K., Banneyake, R., Abdalla, B., Bell, G., Eltaher, A., and Jukes, P., ‘Ice-keel-seabed-pipeline interaction simulation: ICE Pipe JIP extracts’, Special Publication, Journal of Pipeline Engineering, July 2011.
  32. Jafri, S., Eltaher, A., and Jukes P., “Dynamics of Offshore Wind Turbines,” ISOPE, Hawaii, 2011
  33. Wittkower, B., Singh, B., Jukes, P., Hull, M., and Botto, A. “ The Preliminary HAZOP- An Advocate for Use Early-On in the Design Process- Integrity Management Application and Essentials”, ISOPE, Hawaii, 2011.
  34. Nair, A.R., Kadiyala, R., Whooley, A., Eltaher, A., and Jukes, P., “Torsional VIV Damage Assessment of Multi-Planar Structures”, ISOPE, Hawaii, 2011.
  35. Wang, J., Sawant, S., Nguyen, T., Jukes, P., “Analysis of Jumpers subject to various loading conditions,” ISOPE, Hawaii, 2011.
  36. Chakkarapani, V.; Whooley, A., Eltaher, A., Jukes, P., “Vibration Assessment Methodology for Subsea Pipework,” OMAE2011-50233, OMAE, Rotterdam, 2011.
  37. Wang, J., Banneyake, R., Jukes P., and Eltaher, A., “Advanced FEA for Span Mitigation Analysis,” OMAE2011-50239, OMAE, Rotterdam, 2011.
  38. Shi, H., Sun, J., Hossain, K., Eltaher, A., Jukes, P., “Offshore Pipeline Embedment in Cohesive Soil – A Comparison between Analytical and CEL Solutions,” OMAE2011-50230, OMAE, Rotterdam, 2011.
  39. Nair, A., Chauvet, C., Zhu, H., Whooley, A., Eltaher, A., Jukes, P., “Flow Induced Forces on Multi-Planar Rigid Jumper Systems,” OMAE2011-50225, OMAE, Rotterdam, 2011.
  40. Sun, J., Shi, H, and Jukes, P., “Upheaval Buckling Analysis of Partially Buried Pipeline Subjected to High Pressure and High Temperature,” OMAE2011-49498, OMAE, Rotterdam, 2011.
  41. Heiberg, G., Eltaher, A., Sharma, P., Jukes, P., and Viteri, M., “Spiral Wound Linepipe for Offshore Applications,” OTC 21795-PP, OTC, 2011.
  42. Wittkower, B., Singh, B., Jukes, P., Hull, M., and Botto, A. “ The Preliminary HAZOP- An Advocate for Use Early-On in the Design Process- Integrity Management Application and Essentials”, ISOPE, Hawaii, 2011.
  43. Nair, A.R., Kadiyala, R., Whooley, A., Eltaher, A., and Jukes, P., “Torsional VIV Damage Assessment of Multi-Planar Structures”, ISOPE, Hawaii, 2011.
  44. , J., Eltaher, A., Jukes, P., ‘A Simplified FE Model for Permafrost-Thermosyphon Geothermal Analysis’, Paper 22098, Arctic OTC, Houston, Feb. 2011.
  45. Jukes, P., Kenny, S., Panapaitiya, U., Eltaher, A., and Jafri, S., ‘Arctic and Harsh Environment Pipeline Trenching Technologies and Challenges’, Paper 22083, Arctic OTC, Houston, Feb. 2011.
  46. Banneyake, R., Hossain, K., Eltaher, A., Nguyen, T., and Jukes, P., ‘Ice-Soil-Pipeline Interactions Using Coupled Euler-Lagrange (CEL) Ice Gouge Simulations- Results from DNV Ice Pipe JIP’, Paper 22047, Arctic OTC, Houston, Feb. 2011.
  47. Eltaher, A., Al-showaiter, A., Jukes, P., “Analytical Tools for Offshore Arctic Challenges – A State of the Art,” DOT, Amsterdam, 2010.
  48. Wittkower, B., Singh, B., Botto, A., Hull, M., Jukes, P. ‘Early-on HAZOP (PHAZOP) Advocacy: Best Practices – Building from the Past to the Future in Integrity Management’, Proceedings of the TA&M 2010 Mary Kay O’Connor Process Safety Center International Symposium, MKOPSC 2010, College Station, Texas, October 26-28, 2010.
  49. Nair, A., Kadiyala, R., Whooley, A., Eltaher, A., and Jukes, P. ‘Vortex Induced Vibration (VIV) Analysis of Multi-planar Jumpers’, Proceedings of the 5th International Offshore Pipeline Forum (IOPF), IOPF2010-3001, Houston, Texas, Oct. 20-21, 2010.
  50. Eltaher, A., Hossain, K., Jafri., S., Banneyake, R., and Jukes, P. ‘Offshore Geotechnical Applications of Eulerian Finite Element – A State of the Art’, Proceedings of the 5th International Offshore Pipeline Forum (IOPF), IOPF2010-3002, Houston, Texas, Oct. 20-21, 2010.
  51. Zhang, L., Eltaher, A., and Jukes, P. ‘Mathieu Instability of TTR Tension Fluctuation Due to VIV’ Proceedings of the 5th International Offshore Pipeline Forum (IOPF), IOPF2010-2002, Houston, Texas, Oct. 20-21, 2010.
  52. Pike, K., Duan, G., Sun, J., and Jukes, P., ‘Comprehensive FEA of Interaction of Thermal Mitigation Buoyancy Module (TMBM) with Soil using the Coupled Eulerian Lagrangian (CEL) Method’, OMAE, Shanghai, China, Jun 2010.
  53. Xu, J., Eltaher, A., and Jukes P., ‘Warm Pipeline in Permafrost – A Sensitivity Study of the Major Thermal Properties’, OMAE, Shanghai, China, Jun 2010.
  54. Wang, J., Xu, J., and Jukes, P. ‘Cost-Effective Span Analysis Methodology for Different Pipeline Application’, OMAE, Shanghai, China, Jun 2010.
  55. Panapitiya, U., Wang, H., Jafri, S., and Jukes, P., ‘Use of Finite Element Analysis for Stud Pre-Tension Determination of Large Diameter Integral Flanges with Ring Joint Gaskets’, OMAE, Shanghai, China, Jun 2010.
  56. Singh, B., Jukes, P., Wittkower, B., and Poblete, B., ‘Piper Alpha and the Evolution of Inherently Safe Design, and Integrity Management – An overview of Interpretations and Lessons Learned’, OMAE, Shanghai, China, Jun 2010.
  57. Banneyake, R., Eltaher, A., and Jukes, P., ‘Effects of Cross Section Ovalization of Subsea Bends under In-Plane Bending’, OMAE, Shanghai, China, Jun 2010.
  58. Chen, J. M., Sriraman, S., Jukes, P., Clack, R., and Lange, S., ‘A Novel Design of Retrofit Hang-off Structure for Steel Catenary Risers’, ISOPE, Beijing, China, Jun 2010.
  59. Wang, J., Banneyake, R., Xu, J., Jukes, P. ‘An Efficient Global, Local and Solid Finite Element Modeling Approach for Pipeline Expansion Loops’, ISOPE, Beijing, China, Jun 2010.
  60. Jukes, P., Eltaher, A., and Sun, J., ‘The Latest Advances in the Design and Routing of PIP Flowlines in Ultra Deep-water’, SUT Technical Conference, Rio de Janeiro, Brazil, March 2010.
  61. Jafri, S., Nguyen, T., and Jukes, P., ‘Estimating Ovality of a Reeled Pipeline Using Local Finite Element Modeling’, Deep Offshore Technology International (DOT), Houston, Feb 2010.
  62. Banneyake, R., and Jukes, P. ‘Analytical Solutions for Optimum Pretension Requirement to Inner Pipe of Pipe-in-Pipe Flowlines’, Deep Offshore Technology International (DOT), Houston, Feb 2010.
  63. Singh, B., Jukes, P., Poblete, B., Wittkower, B, ‘Deepwater Asset Integrity Management – Interpretation of Lessons Learned Post Piper Alpha’, Deep Offshore Technology International (DOT), Houston, Feb 2010.
  64. Jukes, P., Singh, B., Eltaher, A., ‘Recent Developments in the Critical Thermal, Corrosion and Material Issues Related to Flowline Pipe-in-Pipe (PIP) Systems’, Petroleum Exhibition and Conference of Mexico (PECOM), Villahermosa, Tabasco, Mexico, Nov. 17-19, 2009.
  65. Jukes, P. Sun, J., Chen., J., Eltaher, A., and Brown, T., ‘The use of Advanced Finite Element Analysis Tools for the Design and Simulation of LNG and LPG Subsea Pipelines and Risers’, Petroleum Exhibition and Conference of Mexico (PECOM), Villahermosa, Tabasco, Mexico, Nov. 17-19, 2009.
  66. Hossain, M., Eltaher, A., Jukes, P., Pike, K., ‘The Simulation of Pipe Soil Interaction using Coupled Eulerian-Langrangian (CEL) Method’, Proceedings of the 4th International Offshore Pipeline Forum (IOPF), IOPF2009-1001, Houston, Texas, Oct. 28-29, 2009.
  67. Banneyake, R., Chen, J., and Jukes, P. ‘The Use of Advanced Finite Element Analysis Tools for the Pipe-in-Pipe Steel Catenary Risers’, Proceedings of the 4th International Offshore Pipeline Forum (IOPF), IOPF2009-2001, Houston, Texas, Oct. 28-29, 2009.
  68. Jukes, P., Sun, J., Wang, H., Ozturk, B., and Eltaher, A., ‘The use of 3-D Seabed Imperfections for the Thermal Expansion and Global Buckling design of PIP Flowlines in Ultra-Deepwater’, Proceedings of the 4th International Offshore Pipeline Forum (IOPF), IOPF2009-1002, Houston, Texas, Oct. 28-29, 2009.
  69. Singh, B., Jukes, P., Poblete, B., Wittkower, B. ‘20 Years On Lessons Learned from Piper Alpha- The Evolution of Concurrent and Inherently Safe Design’ Beyond Regulatory Compliance Symposium, Mary Kay O’Conner Process Safety Center, Texas A&M University, Oct 27-28th 2009.
  70. Pike, K., Abdalla, B., Xu, J., Eltaher, A., Jukes, P. (2009). ‘Modeling tools aid in Arctic pipeline design’ Pipelines International, September, 48-49.
  71. Singh, B., Jukes, P., Wittkower, B., Poblete, B, Invited paper: ‘Offshore Brazil New Frontiers Macae, Brazil, Paper # 20051, ‘Offshore Integrity Management 20 years on – Overview of Lessons Learned Post Piper Alpha’ , 16-18th June 2009. (by MCS office Rio De Janeiro).
  72. Wang, J., Wang, S., Duan, G. and Jukes, P. ‘VIV analysis of pipelines under complex span analysis’, Journal of Marine Science Applications, Journal Paper, Vol.8 No. 2, June 2009.
  73. Jukes, P., Eltaher, A., Abdalla, B. and Xu, J., ‘The Use of Advanced Finite Element Analysis Tools for Designing Arctic Pipelines’, International Conference on Subsea Technologies SubSea TECH, St. Petersburg, Russia, 22-25 June 2009.
  74. Abdalla, B., Pike, K., Eltaher, A., and Jukes, P., ‘A Coupled Eulerian Lagrangian Finite Element Model of Ice-Soil-Pipe Interaction’, International Offshore and Polar Engineering Conference (ISOPE), Osaka, Japan, June 2009.
  75. Banneyake, R., Eltaher, A., Sun, J., and Jukes, P. ‘Integrated Structural Reliability-Finite Element Analysis of Lateral Buckling of Offshore Flowlines’, International Offshore and Polar Engineering Conference (ISOPE), Osaka, Japan, June 2009.
  76. Sun, J., Jukes, P., and Duan, G., ‘Free Span Dynamics versus Global Buckling of the High Pressure and High Temperature Pipeline’, International Offshore and Polar Engineering Conference (ISOPE), Osaka, Japan, June 2009.
  77. Wang, J., Eltaher, E., Jukes, P., Sun, J., and Wang, S., ‘Latest Developments in Upheaval Buckling Analysis for Buried Pipelines’, International Offshore and Polar Engineering Conference (ISOPE), Osaka, Japan, June 2009.
  78. Jukes, P., Eltaher, A., and Sun, J. ‘The Latest Developments in the Design and Simulation of Subsea Oil and Gas Pipelines using FEA’, International Offshore and Polar Engineering Conference (ISOPE), Beijing, China, June 2009.
  79. Sun, J., Jukes, P., and Eltaher, A., ‘Exploring the Challenges of Pipe-in-Pipe (PIP) Flowline Installation in Deep-Water’, International Offshore and Polar Engineering Conference (ISOPE), Beijing, China, June 2009.
  80. Abdalla, B., Xu, J., Eltaher, A., Jukes, P. ‘Three Dimensional Finite Element Model for Permafrost-Pipe Interaction’, 20th International Conference on Port and Ocean Engineering under Arctic Conditions POAC, Lulea, Sweden, 9-12 June 2009.
  81. Wang, H., Sun, J., and Jukes, P., ‘FEA of A Laminate Internal Buckle Arrestor for Deep Water Pipe-in-Pipe Flowlines’, Offshore Mechanics and Arctic Engineering Conference (OMAE), Honolulu, Hawaii, 31st May – 5th June 2009.
  82. Sun, J. and Jukes, P., ‘From Installation to Operation – A Full-Scale Finite Element Modeling of Deep-Water Pipe-in-Pipe System’, Offshore Mechanics and Arctic Engineering Conference (OMAE), Honolulu, Hawaii, 31st May – 5th June 2009.
  83. Chen, J., Cao, P., Zhu, H., and Jukes, P., ‘Time Trace Window Based Approach for SCR Strength Analysis in Ultra-Deepwater of GOM’, Offshore Mechanics and Arctic Engineering Conference (OMAE), Honolulu, Hawaii, 31st May – 5th June 2009.
  84. Xu, J., Abdalla, B., Eltaher, A., and Jukes, P., ‘Permafrost Thawing-Pipeline Interaction Advanced Finite Element Model’, Offshore Mechanics and Arctic Engineering Conference (OMAE), Honolulu, Hawaii, 31st May – 5th June 2009.
  85. Abdalla, B., Pike, K., Eltaher, A., Jukes, P. and Duron, B., ‘Development and Validation of a Coupled Eulerian Lagrangian (CEL) Finite Element Ice Gouge Model Ice Scour Model’, Offshore Mechanics and Arctic Engineering Conference (OMAE), Honolulu, Hawaii, 31st May – 5th June 2009.
  86. Jukes, P., Eltaher, A., Sun, J. and Harrison, G., ‘Extra High Pressure High Temperature (XHPHT) Flowlines – Design Considerations and Challenges’, Offshore Mechanics and Arctic Engineering Conference (OMAE), Honolulu, Hawaii, 31st May – 5th June 2009.
  87. Banneyake, R., Sun, J., Chen, J. and Jukes, P., ‘Analytical Estimation of Pretension Requirement to Inner Pipe of Pipe-in-Pipe Flowline in Ultra Deep Water Using J-Lay Installation’, OTC 20256, Houston Texas, 4-7 May 2009.
  88. Brown, T., Jukes, P., and Sun, J., ‘Mechanical Design of Subsea and Buried LNG Pipelines’, OTC 20226, Houston Texas, 4-7 May 2009.
  89. Singh, B. Jukes, P., Wittkower, B., and Poblete, B., ‘Offshore Integrity Management 20 years on – An overview of Lessons Learnt Post Piper Alpha’, OTC 20051, Houston Texas, 4-7 May 2009.
  90. Jukes, P. ‘Validation of FEA Model for Ice Scour’, Russia Offshore, 4th Annual Meeting, Moscow, Russia, Feb 4th-6th 2009
  91. Jukes, P. ‘The Technical Challenges of Designing Extra High Pressure High Temperature (XHPHT) Flowlines for Deepwater’, Global E&P Summit, Barcelona, Spain, 26th -28th January 2009.
  92. Wang, J., Wang, S. Duan, G. Jukes, P., ‘VIV Analysis of Pipelines under Complex Span Conditions, Deepwater Offshore Specialty Symposium, Harbin, China, Jan 16-19, 2009.
  93. Sun, J. and Jukes, P., ‘The Installation Analysis of Pipe-in-Pipe (PIP) Flowlines in Ultra Deep-water’, DeepGulf, New Orleans – Louisiana, December 9-11, 2008.
  94. Eltaher, A., Sun, J. And Jukes, P., ‘A Simplified Monte Carlo Simulation-Finite Element Reliability Analysis of Laterally Buckled Offshore PIP Flowlines under XHPHT Conditions’, Deep Offshore Technology Asia Pacific, Perth Convention Exhibition Centre Perth, Australia, 3-5 December 2008.
  95. Lee, B., Jukes, P., Eltaher, A., and Wang, J., ‘A Methodology for Engineering Criticality Assessment (ECA) for Offshore Pipelines’, Deep Offshore Technology Asia Pacific, Perth Convention Exhibition Centre Perth, Australia, 3-5 December 2008.
  96. Wang, J. and Jukes, P., ‘Appropriate Design of Sleepers for Thermal Management in Deepwater’, Petroleum Exhibition and Conference of Mexico, Villahermosa, Tabasco, Mexico, Nov. 11-13 2008.
  97. Sun, J., Jukes, P., and Wang, H., ‘Design of Pipe-in-Pipe (PIP) Components for Deep-Water and High Pressure and Temperature’, Petroleum Exhibition and Conference of Mexico, Villahermosa, Tabasco, Mexico, Nov. 11-13 2008.
  98. Wang, J., Wang, S., Eltaher, A., Jukes, P., ‘Pipeline Integrity Assessment with Pipeline, Soil and Berm Interaction and External Load’, Petroleum Exhibition and Conference of Mexico, Villahermosa, Tabasco, Mexico, Nov. 11-13 2008.
  99. Jukes, P., Eltaher, A., Wang, J., and Duron, B., ‘The Use of Advanced Finite Element Analysis Tools for the Design and Simulation of Subsea Oil and Gas Pipelines and Components’, Petroleum Exhibition and Conference of Mexico, Villahermosa, Tabasco, Mexico, Nov. 11-13 2008.
  100. Wang, J., Wang, S., Duan, G., Jukes, P. and Eltaher, A., ‘The Latest Developments in the Span Analysis of Pipelines using Advanced FEA Modeling Techniques’, Proceedings of the 3rd International Offshore Pipeline Forum (IOPF), IOPF2008-923, Houston, Texas, Oct. 29-30, 2008.
  101. Eltaher, A., Sun, J., Jukes, P. and Harrison, G., ‘Strain Localization in Buckled Pipe-in-Pipe Offshore Oil and Gas Flowlines – A Probabilistic Assessment’, Proceedings of the 3rd International Offshore Pipeline Forum (IOPF), IOPF2008-907, Houston, Texas, Oct. 29-30, 2008.
  102. Jukes, P., Delille, F., and Harrison, G., ‘Deepwater Pipe-in-Pipe (PIP) Qualification Testing for 350°F Service’, Proceedings of the 3rd International Offshore Pipeline Forum (IOPF), IOPF2008-922, Houston, Texas, Oct. 29-30, 2008.
  103. Wang, J. and Jukes, P., ‘An Integrated Design Approach to the Use of Sleepers as Vertical Upsets for Thermal Buckle Management’, 7th International Pipeline Conference (IPC) IPC2008-64563 Calgary, Canada, September 29 – October 3, 2008.
  104. Abdalla, B., Jukes, P., Eltaher, A and Duron, B., ‘The Technical Challenges of Designing Oil and Gas Pipelines in the Arctic’, Oceans ’08 MTS/IEEE, Quebec City, Quebec, Canada, Sept 2008.
  105. Jukes, P., Eltaher, A. Wang, J., and Duron, B., ‘Finite Element use in Pipeline Design’, The Journal of Offshore Technology, The Institute of Marine Engineering, Science and Technology, pp 24-29, May/June 2008.
  106. Jukes, P., Wang. J., and Wang, S., ‘The Sequential Reeling and Lateral Buckling Simulation of Pipe-in-Pipe (PIP) Flowlines Using Finite Element Analysis for Deepwater Applications’, International Offshore and Polar Engineering Conference (ISOPE), Vancouver, Canada, July 2008.
  107. Jukes, P., Singh, B., Garcia, J. and Delille, F. ‘Critical Thermal, Corrosion and Material Issues Related to Flowline Pipe-in-Pipe Systems’, International Offshore and Polar Engineering Conference (ISOPE), Vancouver, Canada, July 2008.
  108. Wang, J., Jukes, P., Wang. S., and Duan, G., ‘The Efficient Assessment of Subsea Pipelines and Flowlines for Complex Span Scenarios’, International Offshore and Polar Engineering Conference (ISOPE), Vancouver, Canada, July 2008.
  109. Sun, J.J., Jukes, P, ‘Finite Element Analysis of Clamp-on Buckle Arrestor for Pipe-in-Pipe Flowlines by Reel-Lay Installation’, Offshore Mechanics and Arctic Engineering Conference (OMAE), Estoril, Portugal, June 15-20, 2008.
  110. Eltaher, A, Sun, J.J., and Jukes, P ‘Design of Suction Piles for Deepwater HPHT Subsea Pipelines’, Offshore Mechanics and Arctic Engineering Conference (OMAE), Estoril, Portugal, June 15-20, 2008.
  111. Jukes, P., Wang, J., and Duron, B. ‘Solving Pipeline Technology Challenges in the GoM by Innovation, Advanced Analysis Tools, and Engineering Competency’, Offshore Technology Conference, OTC 19504, May 2008.
  112. Jukes, P., Sun, J., and Eltaher, A., ‘Investigation into the Limit State Design of XHPHT PIP Flowlines using Local and Global Finite Element Analysis Methods’, Offshore Technology Conference, OTC 19372, May 2008.
  113. Jukes, P., Eltaher, A., Abdalla, B. and Duron, B. ‘The Design and Simulation of Arctic Subsea Pipelines – Ice Gouging Formulations,’ 4th annual Arctic Oil & Gas conference, Oslo, Norway, April 2008
  114. Jukes, P., Eltaher, A., Abdalla, B. and Duron, B. “The Design and Simulation of Arctic Subsea Pipelines,” Russia Offshore, 3rd Annual Meeting, Moscow, Feb 2008.
  115. Eltaher, A., Jukes, P., Wen, H., and Harrison, G. ‘Strain Localization in Buckled Pipe-in-Pipe Offshore Oil and Gas Pipelines’ Proceeding of IOPF, 2nd Annual International Offshore Pipeline Forum (IOPF), Houston Texas, USA, October 23-25, 2007.
  116. Jukes, P., Wang, J., Eltaher, A., and Harrison, G. ‘A General Flowline Thermal Expansion Design Philosophy Employing Buckle Initiators and Piles’, Proceeding of IOPF, 2nd Annual International Offshore Pipeline Forum (IOPF), Houston Texas, USA, October 23-25, 2007.
  117. Sun, J.J., Jukes, P and Eltaher, A., ‘Finite Element Analysis of ‘Loadshare’ for the Installation of Pipe-in-Pipe Flowline by S-lay and J-lay Methods’, Oceans ’07 MTS/IEEE Conference, Vancouver, Canada, 29th Sept-4th Oct, 2007.
  118. Jukes, P., ‘Innovative Pipelines and Subsea Engineering Experience’, Key Note Paper at The International Conference on Subsea Technologies, St. Petersburg, Russia, 25-28 June, 2007.
  119. Singh, B., Folk, T., Jukes, P., Garcia, J., Perich, W., Oostendorp, D. van., Engineering Pragmatic Solutions for CO2 Corrosion Problems’, NACE07.
  120. Jukes, P. ‘A Design Philosophy for Lateral Buckling in Deep-Water’, Proceedings of IOPF2006-02, 2006 Conference of the ASME International Petroleum Technology Institute, Houston, Texas, USA, October 24-25, 2006.
  121. Jukes, P and Harrison, G. ‘An XHPHT Pipe-in-Pipe Design for Installation By S-lay, J-lay and Reel-lay Methods’, Proceedings of IOPF2006-16, 2006 Conference of the ASME International Petroleum Technology Institute, Houston, Texas, USA, October 24-25, 2006.
  122. Singh, B., Folk, T., Jukes, P., Garcia, J., and Perich, W., ‘From the North Sea to the Gulf of Mexico – Making the Link between Corrosion research & Best Practice’, NACE 2006 San Diego CA – RIP 06R206.
  123. Jukes, P., and Riddington, J.R., ‘The failure of Brick Triplet Test Specimens’, Masonry International, Vol. 15, No 1, 2001, 30-33.
  124. Jukes, P., and Riddington, J.R., ‘Finite Element Prediction of Block Triplet Shear Strength’, 12th International Brick/Block masonry Conference, Madrid-Spain, 25-28 June 2000.
  125. Jukes, P., and Riddington, J.R., ‘A Review of Masonry Joint Shear Strength Test Methods’, masonry International, Vol. 12, No. 2, 1998, 51-57.
  126. Riddington, J.R., Jukes. P., and Morrell, P.J.B., ‘A Numerical Study of Masonry Tensile Bond Strength Test Methods’, Proc. British Masonry Society, No. 8, 1998, 157-164.
  127. Riddington, J.R. Fong, K.H., and Jukes, P., ‘Numerical Study of Failure Initialisation in Different Joint Shear Tests’, Masonry International, Vol. 11, No. 2, 1997, 44-50.
  128. Jukes, P., and Riddington, J.R., ‘A Review of masonry Joint Shear Strength test Methods’, Masonry International, Vol. 11, No. 2, 1997, 37-43.
  129. Jukes, P., Bouzeghoub, M.C., and Riddington, J.R., ‘Measurement of Tensile Strain Softening and its Influence on Bond Tensile Test results’, Computer Methods in Structural masonry – 4, Eds. J. Middleton & G.N. Pande, E.F.N. Spon, London, 1997, 169-176.
  130. Riddington, J.R., and Jukes. P., ‘FE Prediction of Brickwork Panel Shear Strength’, Computer Methods in Structural Masonry – 4, Eds. J. Middleton & G. N. Pande, E.F.N. Spon, London, 1997, 120-127.
  131. Riddington, J.R. and Jukes, P., ‘Determination of Material Properties for use in Masonry FE Analysis’, Proc. British Masonry Society, No. 7, 1995, Vol. 2, 314-319.
  132. Bouzeghoub, M.C., Jukes, P., and Riddington, J.R., ‘Influence of Loading Arrangement on the Initial Mode of Failure Brick Triplet Shear Specimens’, Computer Methods in Structural Masonry – 3, Eds. J. Middleton & G.N. Pande, Books & Journals International Ltd, 1995, 117-126.
  133. Jukes, P., and Riddington, J.R., ‘Ultimate Strength Prediction of Masonry Triplet Samples’, Computer Methods in Structural Masonry – 3, Eds. J. Middleton & G.N. Pande, Books & Journals International Ltd, 1995, 97-106.
  134. Riddington, J.R. and Jukes, P., ‘A Comparison Between Panel, Joint and Code Shear Strength’, 10th International Brick/Block Masonry Conference’, Calgary, Canada, July 1994, 1481-1490.
  135. Riddington, J.R. and Jukes, P., ‘A Masonry Joint Shear Strength Test Method’, Proc Instn. Civ. Engrs., Struct & Bldgs., Vol. 104, 1994, 267-274.
  136. Jukes, P. and Riddington, J.R., ‘Block Joint Shear Strength Testing’, British Masonry Society 2nd Symposium on Testing, Stoke-on-Trent, UK, Nov. 1993.
  137. Riddington, J.R. and Jukes, P., ‘Assessment of a New Masonry Shear Strength Test Method’. Proc. British Masonry Society, No. 6, March 1994, pp. 115-118.